Skip Navigation

Posts
22
Comments
719
Joined
2 yr. ago

  • Just a heads up, OP is a troll. They pop up every so often, sometimes with different accounts, claiming this nonsense. Chav is not, and never has been, a slur, towards working class people or otherwise.

  • While it's nothing like the same degree, as nobody was hurt, we already had black Friday in the UK too. It's the last Friday before Christmas, when the factories would close for the holidays and the workers would typically hit the pubs to celebrate.

    Now we've got black Friday, black Friday season, and even black week being advertised to us, all based on an American holiday in November 🤷🏻‍♂️

  • Sorry, I didn't get a notification for your reply until this morning.

    Thanks for the offer, I'd be happy for any notes or advice :)

    I managed to get Navidrome and Immich set up last night through subdomains, like music.domain.com and photos.domain.com, using the existing Cloudflare tunnel. They seem to be working properly, but I'm going to check them when I'm out later to make sure that nothing was cached rather than being served live.

    One thing I want to look at in the future is local domain names, so music.local etc. and possibly set up certificates to get rid of any warnings about insecure sites. I might switch from AdGuard to PiHole to help with that.

    Something that might make you laugh, I got stuck for an hour or so last night trying to connect to Navidrome through the domain name. I could get to the login page, but couldn't get it to accept my credentials. Substreamer wouldn't log in either. I looked through pages and pages of search results, forum posts, and manuals, but couldn't find an answer. Just before I gave up, I copied the address from Firefox to try in another browser, and realised that I'd forgotten the s in https 😫

  • Please don't apologise, you and the other commenters have been a massive help :)

    It's sod's law though, I was supposed to have two pretty much free days yesterday and today, and they've turned out to be two of the busiest days I've had for a long time. Networking is one of my blind spots, I can never quite get my head around it, so gave myself two days to try to get up to speed and seem to have jinxed myself :D

    I'm going to spend an hour or two now playing around with Cloudflare and Navidrome and see if I can get a better grip on it all.

    Thanks again for the help :)

  • That's great thanks :)

    The fact that it can be always on is really helpful, there's less chance of her forgetting to use it then.

    Tailscale only responds to the range of connections that it's in charge of, so it doesn't interfere with connecting to normal internet, etc.

    This is the other thing that I was concerned about, that everything else would be diverted. Someone else said that it can selectively route apps, and that's put my mind at ease. I don't know why, but anything to do with networking gets me mixed up >.<

    Thanks for your help, I'm going to have a play with some settings :D

  • Ah, that's cool. I'll give it a try once I've had some sleep, it's been a long day. Thanks for the help :)

  • I'm a bit dubious about running Tailscale on the family's devices, as they're not particularly techy, and will forget to launch it if it isn't running for whatever reason, and then I get the blame.

    Wouldn't all traffic go through it when it's running too, or can you select which apps now? They'd mostly be using Android devices.

  • I thought that Sunshine and Moonlight were for screen sharing? I've only ever seen them used for gaming.

  • I'm still a bit confused with all of this so I might be getting things completely wrong. I thought that I needed to get certificates for anything that I wanted to make public with an URL, and that's where I thought Caddy came in, but a few of the other replies have said that I can use the Cloudflare tunnel and let them sort out the encryption. That seems like it should be easier for me, as I've dealt with it already.

    IPv6 isn't available through my ISP as far as I can tell, they only enable it locally through their router at the moment.

  • I just replied to your other comment before I saw this one, but I'll post the reply here too for anyone who's following the thread :)

    The main thing I'm still not sure of is Tailscale. I don't know if I can just put my services behind an URL for my wife to add to her devices, as she's unlikely to remember to run Tailscale before she listens to her music, for example.

    Sorry, I've just replied to another comment before I saw yours. I didn't realise that Cloudflare could deal with encryption on its own, I thought you needed something like Caddy to get certificates. I found out after seeing the other comment that one of my services running through the Cloudflare tunnel is encrypted, but I couldn't get it to work in the past. I'm not sure what's changed, but I'm going to give it a proper look once I've had some sleep.

    There's something about the networking side of things that just throws me, and I struggle to get my head around it. If I can get things running through Cloudflare, I'll be very happy :)

  • Sorry, I've just replied to another comment before I saw yours. I didn't realise that Cloudflare could deal with encryption on its own, I thought you needed something like Caddy to get certificates. I found out after seeing the other comment that one of my services running through the Cloudflare tunnel is encrypted, but I couldn't get it to work in the past. I'm not sure what's changed, but I'm going to give it a proper look once I've had some sleep.

    There's something about the networking side of things that just throws me, and I struggle to get my head around it. If I can get things running through Cloudflare, I'll be very happy :)

  • Huh, I didn't know that! I've had the Cloudflare tunnel running for quite a while now, and tried getting something set up on https a few years ago, but couldn't get it to work. I've just checked my Ombi service and it is encrypted. I don't know what's changed, but I'm going to have another look, thanks :)

  • Sorry about the slow reply.

    This is where I get confused with Tailscale. Doesn't everything then go through Tailscale, like when you run a VPN? Ideally I just want to be able to connect with a link and save that in the remote app / program, and also avoid having my wife forget to start Tailscale and shout at me >.<

  • Sorry about the slow reply. Don't I need to be running Tailscale on the remote device then though? Ideally I want to be able to put a link into whichever app / program and be able to share that link with my wife and kid

  • Selfhosted @lemmy.world

    Need some help with remote access please.

  • I had one of these marketing messages from Amazon this morning. I've never contacted them through WhatsApp, and as far as I can remember, have never contacted them outside of their apps. I definitely haven't contacted them with my phone number.

    They have my phone number, but it's supposed to be for delivery issues, and I've withdrawn all advertising and marketing consent.

    EDIT: I just checked, and I was automatically opted in to WhatsApp marketing, despite having turned off all other marketing 😤

  • I've done basically the same thing with my computer. While I was still stuck with Windows, my main installation broke and took ages to boot. I installed another copy onto the same disk to run some software, then dual (triple?) booted with Mint.

    Mine are all on the same physical disk, but the process should be the same.

    The Mint bootloader took over from Windows, and presents me with a menu on boot. The default choice is Mint, which automatically boots after a few seconds, but it gives me a few options, one of which is the Windows bootloader. If I choose this, it gives me the same options as before I installed Mint, so lets me boot into either installation.

    It goes without saying, but make a backup before you change anything, and remember that Boot Repair is available for most Linux distros :)

  • Holy shit, I think I love your parents 🤣

  • As others have said, they're usually disposable. If not, or if you want to try cleaning them anyway, try putting them into a mesh bag or something similar, then put them in the washing machine on a gentle wash cycle and let them dry naturally.

    Obviously, try this with a small amount first, so that if they don't survive the process it's not the end of the world. If you don't have a mesh bag, a clean sock should be ok, just tie the end closed.

    You can wash them in the sink with warm water and a little bit of soap too, but it's more work. Just remember to rinse them thoroughly before they go back in your ears :)

  • I mostly agree, but some small communities, many years ago, would go by oldest, continuing from where you left off last time. That was fantastic for the sort of place where you wanted to read everything for whatever reason. If that could be put in on a community basis, it would be great :)

  • Mildly Infuriating @lemmy.world

    It's just taken me 55 minutes to watch a 35 minute episode on Plex because of crashes

  • Linux @lemmy.ml

    Is there a way to use a vpn on one network card, and use a second network card for a regular connection?

  • Open Source @lemmy.ml

    What's the best licence for sharing content with an organisation while keeping my rights?

  • Linux @lemmy.ml

    What's the best way to mount hard drives so that all users can access them at all times? Mint 22

  • Ask Lemmy @lemmy.world

    If you could have every answer to your history based questions, would you take them?

  • Linux @lemmy.ml

    Can a Linux installation be run as a VM in Windows?

  • Mildly Infuriating @lemmy.world

    My laptop hinge just ripped its screws right out.

  • Open Source @lemmy.ml

    Looking for a collaborative notes app

  • Open Source @lemmy.ml

    Does anyone know of any decent accounting software for Windows and Linux?

  • Linux @lemmy.ml

    Looking for a minimal distro for a virtual machine

  • Mildly Infuriating @lemmy.world

    According to my camera's focus assist, this is perfectly focused

  • Linux @lemmy.ml

    Need some help with Xubuntu networking please.

  • Asklemmy @lemmy.ml

    How can I get free or cheap artwork for a project if I can't draw and don't want to use AI?

  • Free and Open Source Software @beehaw.org

    FOSS ereader app that syncs the page read?

  • Linux @lemmy.ml

    Any good tools for switching?

  • Self Hosted - Self-hosting your services. @lemmy.ml

    How hard is it to move Docker containers to another system?

  • Piracy: ꜱᴀɪʟ ᴛʜᴇ ʜɪɢʜ ꜱᴇᴀꜱ @lemmy.dbzer0.com

    Where can I find the detailed rules for Real Debrid?

  • Linux @lemmy.ml

    MediaMonkey Linux and Android alternative?

  • Linux @lemmy.ml

    What's the best Epson scanner software for Mint?